Connect with us

Business

Peak time rail fares scrapped on ScotRail trains

Published

on

Peak time rail fares scrapped on ScotRail trains


Debbie JacksonBBC Scotland News

Getty Images A close-up image of a train ticket from Edinburgh to Glasgow Central, held in someone's hand. The ticket is orange and white.Getty Images

From 1 September, there will be no more peak fares on ScotRail trains

Peak rail fares have been scrapped on ScotRail trains, meaning passengers will no longer pay higher prices for travelling on busy weekday trains.

Until now, many ScotRail tickets were based on the time of travel. Edinburgh to Glasgow peak times will be almost 50% cheaper, with trips between Perth and Dundee a third lower.

The Scottish government-owned operator said its aim was to get more commuters out of cars and onto trains.

Season tickets and fares on routes with peak time prices are unchanged. Multi-journey flexipass tickets have been adjusted with smaller savings.

Peak ScotRail fares used to cover tickets bought for travel before 09:15 on weekdays and certain services between 16:42 and 18:30.

A pilot scheme scrapping peak-time fares, a policy championed by the Scottish Greens, was introduced in 2023 but ended in September 2024 after ministers said the costs of the subsidy could not be justified.

However, in his programme for government speech in May, First Minister John Swinney announced that peak fares would again be scrapped.

Speaking at the launch of the scheme in Edinburgh on Monday, he said it would help people to move “from their cars onto trains”, which would provide environmental benefits.

He added: “This is financially sustainable because it’s an investment in the rail network and it’s an investment in the people of Scotland.

“People in Scotland simply travelling from Edinburgh to Glasgow on a daily basis will see their travel costs fall by almost 50%. That’s a massive saving when people are struggling financially.”

ScotRail ticketing will also be more straightforward and flexible under the new system, the firm has said.

How is scrapping peak fares being paid for?

A digital billboard at Queen Street Station in Glasgow  says "Peak fares. Gone for good."

ScotRail has launched a marketing campaign to promote the cheaper fares

ScotRail has been owned and run by the Scottish government since 2022.

In October 2023 the rail firm started a year-long trial of scrapping peak fares with the aim of persuading more people to swap car journeys for rail travel.

Last year, Scottish ministers announced the trial had “limited success” and would not be extended.

An evaluation of the first nine months of the trial found passenger levels increased by a maximum of about 6.8%.

This represented around four million extra rail journeys, of which two million are journeys that would previously have been made by private car.

However, the scheme required a 10% rise to be self-financing.

Scotland’s Transport Secretary Fiona Hyslop also said at the time that the pilot “primarily benefited existing train passengers and those with medium to higher incomes”.

The evaluation found the estimated cost of the scheme was “in the annual range of £25m to £30m per annum (in 2024 prices) with the possibility of being as large as £40m”.

Swinney said he expected the annual cost to be between £40m to £45m each year and lead to a “huge saving” for individuals.

If the new scheme does not become self-financing through an increase in passenger numbers, the costs will be met from the ScotRail budget.

This is made up of revenue from passenger fares and the £1.6bn the Scottish government puts into rail services every year.

Getty Images A ScotRail train arrives at Waverly station in Edinburgh in the sunshine, the castle in the background. People are making their way off the train and up the platform.Getty Images

ScotRail ticketing will be more simple and flexible under the new system

Joanne Maguire, managing director at ScotRail told BBC Scotland News: “We are really excited at the opportunity to get more customers out of their cars and onto the railway.

“If you are travelling from Edinburgh to Glasgow you will see a saving of about 50%.

“From Inverkeithing to Edinburgh, you will save 40% and between Inverness and Elgin it is 35% – so it’s great news for our passengers.”

Ms Maguire said the trial period had seen an increase in passenger numbers and that ScotRail had enjoyed a successful summer of moving customers around to numerous big leisure events.

She added that the goal now was to grow the commuter passenger base.

Tommy Whitelaw, who has a bald head and is wearing glasses, is seen from the mid-chest up. He appears to be middle-aged, has a friendly expression and is smiling. He is wearing a dark olive green or greyish-green jacket or windbreaker with a zipper and a hood.  In the background is a train station with large windows with reflective glass showing a city street scene beyond, including a light-coloured building with arched windows.

Passenger Tommy Whitelaw said the end of peak fares made a huge difference

‘Deeply unfair tax’

Several passengers at Glasgow’s Queen Street station told BBC Scotland News they were unaware that peak time fares had been dropped – but welcomed the move.

Student Robbie McCormack said: “I commute every day for college and it’s quite expensive.

“I’ll be able to save throughout the week, save more college money and get something else for lunch.”

Passenger Tommy Whitelaw travels across Scotland giving talks to charities and care homes.

He said the end of peak fares removed the limits on when many people could travel.

He added: “It makes a difference to everybody, its our duty to make everything achievable for people.

“The cost of living shrinks our world, this is one way to open it up a wee bit.”

Susan Watts, from Leeds, told BBC Your Voice that peak fares should be scrapped UK-wide.

She said: “Our complicated fare system is enough to put anyone off using trains.

“In Italy, I paid the same price for a ticket when I turned up an hour before as if I’d booked months earlier – the price is just the price.”

Green MSP Mark Ruskell said peak rail fares were a “deeply unfair tax” on people who had no say over when they needed to travel.

“I am delighted that we are finally rid of them,” he said.

“I’m glad that the Scottish government has finally listened to the Greens, the trade unions and the rail users who were responsible for securing the initial pilot.”

Your Voice Your BBC News strapline



Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Business

Walmart and Alquist strike landmark deal, jump-starting 3D-printed commercial real estate

Published

on

Walmart and Alquist strike landmark deal, jump-starting 3D-printed commercial real estate


Construction company Alquist 3D worked with Walmart last year to build a nearly 8,000-square-foot 3D printed addition to its store in Athens, Tennessee.

Alquist

A version of this article first appeared in the CNBC Property Play newsletter with Diana Olick. Property Play covers new and evolving opportunities for the real estate investor, from individuals to venture capitalists, private equity funds, family offices, institutional investors and large public companies. Sign up to receive future editions, straight to your inbox.

Walmart partnered with construction company Alquist 3D last year to build an almost 8,000-square-foot addition to its store in Athens, Tennessee, for online order pickup and delivery services. It is the largest 3D-printed commercial structure in the U.S. and, despite a bumpy start, a key proof of concept for the technology’s commercial viability. 

Alquist, based in Greeley, Colorado, just announced it will now print more than a dozen new Walmart buildings, as well as buildings for other commercial retailers, in what is arguably the largest-scale commercial real estate deployment of this technology, which has mostly been used in residential construction so far. 

As part of that deal, Sika, one of the world’s largest construction materials companies, with a heavy focus on sustainability, will provide materials to Alquist for all future 3D-printed projects and licensees. This will streamline Alquist’s national pipeline, lower material and freight costs, and accelerate development of more sustainable mixes for large-scale 3D-printed construction — including the commercial projects rolling out with Walmart, according to Alquist.

“This collaboration positions Sika at the forefront of next-generation construction, opening new markets and creating long-term growth opportunities,” said Noah Callantine, 3D concrete printing engineer and field service specialist with Sika.

It is a clear turning point in CRE construction, which has been notoriously slow to modernize. The new technology has started to grow in the homebuilding market, but has been far slower in commercial construction, simply due to the size of the printers needed to create larger buildings.

Alquist, which designs and builds the larger-scale printers, as well as develops the code and software to operate them, started in the residential sector. It is now partnering with a large equipment rental dealer and a full-service general contractor to scale the technology commercially nationwide. Doing so helps to lower the high cost of materials, as well as the labor, which needs to be both trained and local, according to Alquist. 

“The way to bring prices down [for] anything is to get volume, and as you get volume, you get the attention of suppliers. They see that it matters, and the more that they make, the cheaper that they can bring their supply chain down,” said Patrick Callahan, CEO of Alquist.

Growing pains 

Construction company Alquist 3D worked with Walmart last year to build a nearly 8,000-square-foot 3D printed addition to its store in Athens, Tennessee.

Alquist

Callahan’s background is in defense technology, not construction, and he has positioned Alquist as a tech company. He said he follows the mandate of company founder Zach Mannheimer to find ways to build residential and commercial buildings and infrastructure faster, cheaper, better and greener. 

He admitted the first project in Athens took far too long, as they worked out the kinks in both managing the materials and implementing the technology to print their first commercial building. 

“It was a sort of classic Silicon Valley failing forward job,” Callahan said.  “We were not part of the design process. They changed permitting. … The general contractor that we fell under met us about a week before we started, and nobody had ever done this before.”

The second project, a 5,000-square-foot Walmart pickup center in Huntsville, Alabama, took just seven days to complete. 

3D labor 

While the projects take far fewer workers, they need to be more highly trained than typical construction trades. Alquist partners with trade schools for its curriculum, introducing robotics and green materials. Callahan said that has been more attractive to what has been a severely reduced construction labor market in recent years.

“You’re not necessarily throwing rocks around up on a scaffolding, but using robotics in a safe, clean environment,” Callahan said. “We’ve seen a lot of what used to be traditional construction folks that kind of pushed back, they’re now leaning in.”

Growing competition

Icon Build, the largest residential 3D printing technology company, is also starting to dip its toes into commercial construction. It has completed a hotel project and is now in talks with potential commercial partners, including for construction of data centers. Its forthcoming Titan printer will be able to handle those larger-scale projects. 

“I think once that’s out in the world, showing what it can do, verifying the cost estimations that we’re making to customers, I think that’ll probably open a lot of people’s eyes,” said Jason Ballard, co-founder and CEO of Icon. “I think we should expect to see a lot of interest in alternative ways of construction, data centers and other kinds of commercial things as well.”

But Ballard sees more headwinds than Callahan, particularly when it comes to labor. He said data centers are already “sucking up a lot of the labor in the market.” He added that 3D printing for commercial buildings will have similar pressures as residential to build more affordably and more quickly relative to conventional construction methods. 

That said, Ballard said next year Icon will be manufacturing at least one of the new Titan printers each month, setting itself up to scale construction dramatically. Those printers will be able to create most types of industrial commercial buildings, although they are not ready for high rises. 

“If we do what I expect that we’re going to be able to do next year and show, both on the revenue side, the cost side, the technology advancement side — I think we’ll grow over 300% next year, and we were already pretty busy this year,” Ballard said. “I think the world’s going to start to say, perhaps there are real opportunities to do better, beyond the pilot scale.”



Source link

Continue Reading

Business

Sensex, Nifty Slip Ahead Of US Fed Decision; Sensex Falls 275 Points

Published

on

Sensex, Nifty Slip Ahead Of US Fed Decision; Sensex Falls 275 Points


Mumbai: Benchmark indices Sensex and Nifty closed lower on Wednesday as investors stayed cautious ahead of the US Federal Reserve’s monetary policy decision due later in the day. 

The Sensex fell 275.01 points, or 0.32 per cent, to finish at 84,391.27. The Nifty also slipped 81.65 points, or 0.32 per cent, to settle at 25,758.

“Structurally, Nifty continues to face strong supply in the 25,940–26,050 zone, keeping the broader setup range-bound to mildly bullish,” market watchers said.

Add Zee News as a Preferred Source


“A decisive breakout above 26,000 remains essential to revive upside momentum. On the downside, a sustained break below 25,700 could expose the index to 25,600–25,500, with volatility expected to intensify near these support clusters,” they added.

Bank Nifty also ended marginally lower — indicating a pause in the prevailing uptrend rather than a trend reversal.

The index opened near 59,280, moved up to 59,440, but later slipped to an intra-day low of 58,850 before closing around 58,990, down nearly 0.4 per cent.

Among the Sensex stocks, Tata Steel, Sun Pharma and ITC were the top performers. On the other hand, Eternal, Trent and Bharti Airtel dragged the index down with notable losses.

The mood was weak in the broader market as well. The Nifty MidCap 100 index declined 1.12 per cent, while the Nifty SmallCap 100 index shed 0.90 per cent by the close.

Sector-wise, consumer durables stocks saw the sharpest fall, with the Nifty Consumer Durables index tumbling 1.72 per cent.

IT and PSU bank shares also slipped, down 0.89 per cent and 0.70 per cent, respectively.

In contrast, Nifty Metal and Nifty Media indices ended the day on a positive note, emerging as the top sectoral gainers.

“Focus now shifts to the upcoming US Fed meeting, where a 25-bps rate cut is widely expected,” experts stated.

“However, internal divisions and mixed economic indicators may temper expectations for further rate cuts in 2026,” they added.

 



Source link

Continue Reading

Business

Gold price today: How much 22K, 24K costs in Delhi, Mumbai – Check rates – The Times of India

Published

on

Gold price today: How much 22K, 24K costs in Delhi, Mumbai – Check rates – The Times of India


Gold prices showed a mixed trend on Wednesday, with domestic futures inching up even as international rates dipped. On the Multi Commodity Exchange, February gold futures rose by Rs 173 to Rs 1,30,280 per 10 grams, while Comex gold for the same month traded marginally lower at $4,234.3 an ounce.Gold price in your city today:

Gold rate in Delhi today

In the national capital, 22K gold is currently priced at Rs 11,960 per gram, while 24K gold is selling at Rs 13,046 per gram.

Gold rate in Mumbai today

Mumbai is seeing 22K gold at Rs 11,945 per gram, and 24K gold available at Rs 13,031 per gram.

Gold rate in Bengaluru today

Bengaluru markets list 22K gold at Rs 11,945 per gram, whereas 24K gold is priced at Rs 13,031 per gram.

Gold rate in Chennai today

Chennai continues to record among the highest figures, with 22K gold marked at Rs 12,030 per gram and 24K gold at Rs 13,124 per gram.

Gold rate in Kolkata today

In Kolkata, 22K gold is being sold at Rs 11,945 per gram, while 24K gold is available at Rs 13,031 per gram.

Gold rate in Hyderabad today

In Hyderabad, 22K gold is priced at Rs 11,945 per gram, and 24K gold at Rs 13,031 per gram.

Gold rate in Ahmedabad today

Ahmedabad buyers are paying Rs 11,950 per gram for 22K gold and Rs 13,036 per gram for 24K gold.

Gold rate in Jaipur today

Jaipur has 22K gold priced at Rs 11,960 per gram, and 24K gold tagged at Rs 13,046 per gram.

Gold rate in Bhubaneswar today

In Bhubaneswar, 22K gold stands at Rs 11,945 per gram, while 24K gold is quoted at Rs 13,031 per gram.

Gold rate in Kanpur today

Kanpur’s market shows 22K gold at Rs 11,960 per gram, with 24K gold selling for Rs 13,046 per gram.





Source link

Continue Reading

Trending