Connect with us

Tech

I Tested More Than a Dozen Pixel 10 Cases. These Are the Best

Published

on

I Tested More Than a Dozen Pixel 10 Cases. These Are the Best


Enter the MagSafe Accessory World

Joby

GripTight Tripod Mount for MagSafe

I have been testing MagSafe accessories for years, and you should totally take advantage of the vast ecosystem with your new Pixel. Whether you want a magnetic wallet or phone tripod, we have plenty of WIRED-tested recommendations in our guides. Most of them should work without fail on the Pixel 10 series. Here they are:

Other Cases and Accessories We Like

Mous Clarity Pixelsnap Case for $70: This is my second favorite clear case after Dbrand’s Ghost 2.0. There’s a thick bumper around the phone to absorb impacts, a solid magnetic connection, and a nice lip around the screen to keep it off the ground. The buttons are clicky, too.

OtterBox Symmetry Clear Pixelsnap Case for $60: This is a nice, clear case that’s also Pixelsnap-certified. The cutouts are accurate, the edges are slightly raised over the screen, and it offers a decent grip. If you prefer a completely clear case without a separate bumper, this will satisfy.

Spigen Parallax, Nano Pop, and Liquid Air Pixelsnap Cases for $19: I’ve tried several Spigen cases, and the Rugged Armor is my favorite this year (see above). These other options have different designs, but they’re solid cases for the money. I found the Parallax slippery, and the sides also felt a bit cheap. The Nano Pop had a decently grippy texture on the edges, but the Liquid Air is one of my favorite Spigen designs. The buttons are just a little stiffer than I’d like. These are minor nitpicks, though. They’re great cases for under $20, especially considering they’re all Made for Google-certified.

Spigen GlasTR EZ Fit Tempered Glass Screen Protector for $20 (2 Pack): This is the best bang for your buck when it comes to screen protection. Spigen gives you two in the box, and its application tool makes it impossible to make a mistake when installing the tempered glass protector. There’s even a squeegee tool to push out air bubbles. All that for $20.

UAG Pathfinder Pixelsnap Case for $60: Someone probably likes how this case looks. That person is not me, but clearly, there’s a market for this styling. If you fall in that camp, there’s not much to complain about the Pathfinder, except I found the buttons slightly stiffer than usual. It checks off all the other boxes, with a raised lip over the screen, but I just don’t find it that attractive (sorry).

UAG Glass Shield Screen Protector for $40: UAG includes the usual wet wipe, dust removal sticker, and microfiber cloth, and there’s a plastic shell you place on top of your Pixel to use as a guide when applying the tempered glass screen protector. It’s not the easiest method I’ve tried, as there’s room for some error (and potential to get grime or a smudge on the underside as you apply), but it was fairly quick and painless, and the air bubbles disappeared quickly.

Burga Tough Case for $50: This is one of the few non-magnetic cases I’ve tested for the Pixel 10 series. Burga doesn’t have its Pixel 10 cases listed on the website yet, but says it plans to add them soon. If you absolutely don’t care for Qi2 and magnets in these phones, this is a perfectly fine case, and Burga has tons of designs you can choose from. The exterior is a hard plastic shell, but the phone is wrapped in a soft rubbery shell that absorbs impacts. The buttons are fairly clicky—not the most responsive—and there’s a solid lip around the screen.

Poetic Guardian and Poetic Revolution Case for $25: Poetic sent me two of its cases to test for the Pixel 10 series. One thing to note is that Poetic includes a screen protector that embeds itself into the case, like old-school cases that offered full protection. Unfortunately, the screen protector quality is really not great (there’s a visible circle cutout for the fingerprint sensor, and it looks jarring. Sliding your finger on it just doesn’t feel great. You can thankfully opt not to use it; use the plastic frame that comes in the box instead. The Revolution doesn’t have any magnets but has a built-in kickstand and a cover that can completely protect your cameras; I find this a little extreme, so I don’t care for it. It also, in my humble opinion, looks hideous. The Guardian looks much better, with a thick bumper, raised edges, and a covered port. The buttons are a little stiff, but at least it has built-in magnets for Qi2 (not certified).



Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

How Data Centers Actually Work

Published

on

How Data Centers Actually Work


Lauren Goode: Well, they’re all interested in growing more. Who among us, Mike? But the hyperscalers refers to this class of major tech companies or cloud service providers. So Meta, Amazon, Microsoft, Google, they’re all in that category.

Molly Taft: Yeah, and I think it’s important to remember that these companies have so much money and they have an ability to raise capital like nobody’s business. So they’re able to do some really crazy stuff to build quick and to build-out really, really big. And they’re getting pretty creative, because their goals right now are to build these things quickly and get them up and running so they can basically use this physical infrastructure to compete with each other.

Lauren Goode: I think that’s right, Molly. I think there’s a lot of frenemy building happening right now, and I would just love to be a part of their group chats when all of these announcements are being made.

Michael Calore: Yeah, and speaking of frenemies, the other sphere of influence that these companies are operating in is the political sphere. Obviously, in order to build a giant data center somewhere, you need to have the political will to do it, which means you need buy-in from the local residents, the local government, the state, the country. So what’s happening in the political sphere with folks who want to build more data centers and people who oppose it, regulation? How is that playing out?

Molly Taft: That’s a great question, and I think if you look at the national conversation, it’s quite different than what’s happening on the local level. You have Washington, you obviously have an administration that is very friendly to the idea of an American AI empire. Importantly for the energy conversation, the way that the Trump administration has approached this support has been through support of fossil fuels. They would really like for all data centers to be powered with oil and gas, a little bit of nuclear and coal. And this works out great for those industries as well. If you’re going to have this massive expansion of power demand, it’s really cool to be in the middle of that and be the one that everyone wants to turn to for energy resourcing. And then on the other side, there has been this influx of local opposition to these data centers for a variety of reasons, be it the water use, be it fears about rising electricity rates, be it noise, and some of the really big struggles have catapulted this issue to national conversation. I’m thinking about xAI in Memphis. When Elon Musk wanted to get xAI up and running, he installed a bunch of unpermitted gas turbines in order to get xAI working that he installed in a majority Black community in Memphis that already had severe issues with air pollution and asthma. And those folks made themselves known. Earlier this year, there was an attempt in DC to impose a moratorium on any state regulation around AI at all. It was an incredibly broad inclusion in the Big Beautiful Bill that ultimately didn’t succeed. But one of the people who opposed it publicly was Marjorie Taylor Greene, who actually mentioned data centers in her opposition, and she compared AI to Skynet, the fictional AI from the Terminator movie franchise. So, this is getting some strange bedfellows in league with each other, I think this kind of contrast between what the administration is trying to push forward and some very powerful energy companies that stand to gain from it, versus some truly grassroots local movements and people concerned about the impacts of what these things are going to do in their communities.



Source link

Continue Reading

Tech

Isotropic MOF coating reduces side reactions to boost stability of solid-state Na batteries

Published

on

Isotropic MOF coating reduces side reactions to boost stability of solid-state Na batteries


An illustration summarizing the LSV–GCMS technique. Credit: Liu et al. (Nature Energy, 2025).

In recent years, energy engineers have been trying to design new reliable batteries that can store more energy and allow electronics to operate for longer periods of time before they need to be charged. Some of the most promising among these newly developed batteries are solid-state batteries, which contain solid electrolytes instead of liquid ones.

Compared to batteries with liquid electrolytes that are widely used today, solid-state batteries could exhibit higher energy densities (i.e., could store more energy) and longer lifetimes. However, many of these batteries have been found to be unstable, due to unwanted chemical reactions that occur between their high-voltage cathodes (i.e., positive electrodes) and solid electrolytes, which can speed up the degradation of the batteries’ performance over time.

These undesirable side reactions are particularly common in sodium-ion (Na+) solid-state batteries, which use Na+ ions to store and release electrical energy. This is because while Na is more abundant and cheaper than lithium, Na-ion batteries are inherently more chemically reactive than Li-ion batteries.

Researchers at the Chinese Academy of Sciences recently introduced a promising strategy to increase the durability and performance of solid-state Na-based solid-state batteries, by minimizing side reactions between their underlying cathodes and solid electrolytes. This strategy, outlined in a paper published in Nature Energy, entails the growth of a dense metal-organic framework (MOF) layer on the surface of high-voltage cathodes, which could prevent them from reacting with .

“Side reactions between high-voltage cathodes and electrolytes remain a critical obstacle to the advancement of solid-state batteries—particularly for Na-ion systems—due to the higher Na+/Na redox potential,” wrote Yuan Liu, Huican Mao and their colleagues in their paper.

“Despite recent extensive efforts, achieving a long cycle life is still challenging at the 4.2 V cut-off (versus Na+/Na). We design a room-temperature isotropic epitaxial growth to achieve a relatively uniform and dense metal–organic framework epilayer on Na3V2O2(PO4)2F surfaces.”

To assess the potential of their approach, the researchers grew a uniform MOF coating on Na₃V₂O₂(PO₄)₂F cathodes via a process known as room-temperature isotropic epitaxial growth. They then created a solid-state battery, pairing this coated electrode with a solid electrolyte based on the polymer polyethylene oxide.

“Despite using polyethylene oxide, a typical ether-based solid polymer electrolyte, the cathode with isotropic epilayer exhibits enhanced cycling performance at the 4.2 V cut-off (retaining up to 77.9% of its initial capacity after 1,500 cycles),” wrote the authors.

“Combining experimental measurements and theoretical analyses, the key factor governing isotropic epitaxial growth behavior is explicitly elucidated. Furthermore, we develop a self-designed high-sensitivity characterization method, in situ linear sweep voltammetry coupled with , to elucidate the failure mechanism of polyethylene oxide on Na3V2O2(PO4)2F surfaces and to reveal the excellent electrochemical stability of the isotropic epilayer.”

In initial tests, solid-state batteries based on the team’s coated cathode material were found to perform remarkably well, exhibiting significantly fewer side reactions between the and electrolyte. Notably, the strategy they employed could also be applied to other cathodes and batteries with different compositions.

Other researchers could soon draw inspiration from this study and employ similar strategies to stabilize other Na-based solid-state batteries. In the future, the isotropic epitaxial method developed by Liu, Mao and their colleagues could ultimately contribute to the large-scale deployment of durable and reliable with high-energy densities.

Written for you by our author Ingrid Fadelli, edited by Gaby Clark, and fact-checked and reviewed by Robert Egan—this article is the result of careful human work. We rely on readers like you to keep independent science journalism alive.
If this reporting matters to you,
please consider a donation (especially monthly).
You’ll get an ad-free account as a thank-you.

More information:
Yuan Liu et al, Designing an isotropic epilayer for stable 4.2 V solid-state Na batteries, Nature Energy (2025). DOI: 10.1038/s41560-025-01857-y.

© 2025 Science X Network

Citation:
Isotropic MOF coating reduces side reactions to boost stability of solid-state Na batteries (2025, October 24)
retrieved 24 October 2025
from https://techxplore.com/news/2025-10-isotropic-mof-coating-side-reactions.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.





Source link

Continue Reading

Tech

How Prankster Oobah Butler Convinced Venture Capitalists to Give Him Over $1 Million

Published

on

How Prankster Oobah Butler Convinced Venture Capitalists to Give Him Over  Million


Not long into his new documentary, Oobah Butler tells the cofounder of his newly minted company, Drops, that they should create a piece of luxury luggage that “looks like a bomb” and will sell for $200,000.

Immediately, I’m thinking his quest to get £1 million in 90 days might have come to an early end.

But I’m wrong.

Butler is a British prankster documentarian who is known for his stunts, like managing to get Amazon to sell its drivers’ urine as energy drinks or creating a fake restaurant called the Shed and gaming TripAdvisor to make it the top-rated London restaurant on the platform. His latest documentary, made for the UK’s Channel 4, is called How I Made £1 Million in 90 Days. Set in London and New York, it takes on the worlds of startups, venture capital, crypto, and what ultimately comes across as a lot of bullshitting, in the name of striking it rich quick.

Butler opens the film by saying, as someone who didn’t grow up with money and isn’t particularly motivated by it, he’s fascinated by the fact that people “idolize” wealthy entrepreneurs.

“It came from a place of wanting to understand why … everyone is so obsessed with money in this way,” he tells WIRED. “And I’m not talking about survival. I’m not talking about affording to exist. I’m talking about … being addicted to the making of money.”

His only rules for getting £1 million ($1.3 million USD) are that he’s not allowed to break the law and whatever costs he incurs trying to make it are his to bear. He employs several strategies to rack up the cash, including simply asking rich people for it (this doesn’t go well) and creating hype for crypto company UNFK by doing things like tricking bankers into committing crimes on camera. He also creates Drops, a company that makes news for its controversial stunts and then tries to capitalize on the attention by selling “very overpriced” items.

Butler seeks the advice of Venmo cofounder Iqram Magdon-Ismail, who quickly declares himself Butler’s cofounder on Drops and seems very enthusiastic at first, musing that the company is already “worth at least $10 million” just because the two of them are attached to it, and that they might be able sell out Madison Square Garden in a year’s time to tell their story. Their brainstorming session includes schemes for buying the first piece of land on Mars and selling the opportunity to name the “first branded species.” But after Butler suggests the bomb-like suitcase and a pair of “real life ad blocking sunglasses” that remove the wearer’s vision entirely, Magdon-Ismail temporarily ghosts him.

Butler then embarks on a memecoin adventure that goes south, before coming back to Drops and launching the “first legal child sweatshop in Britain in over a century.” He finds a loophole to avoid paying the child workers, reasoning that because he is filming the kids for the documentary, they are technically performers. His underage staff help him come up with marketing ideas to sell bespoke soccer jerseys featuring a fake religious cigarette brand called Holy Smokes. Though the clothing line gets coverage in GQ, Butler doesn’t sell anything close to £1 million worth of jerseys.



Source link

Continue Reading

Trending