Tech
Judge Delays Minnesota ICE Decision While Weighing Whether State Is Being Illegally Punished
A federal judge on Monday declined to immediately curb the federal operation that has put armed agents on the streets of Minneapolis and St. Paul, but ordered the government to file a new briefing by Wednesday evening answering a central claim in the case: that the surge is being used to punish Minnesota and force state and local authorities to change their laws and cooperate with the targeting of local immigrants.
The order leaves the operation’s scope and tactics in place for now, but requires the federal government to explain whether it is using armed raids and street arrests to pressure Minnesota into detaining immigrants and handing over sensitive state data.
In a written order, Judge Kate Menendez directed the federal government to directly address whether Operation Metro Surge was designed to “punish Plaintiffs for adopting sanctuary laws and policies.” The court ordered the Department of Homeland Security to respond to allegations that the surge was a tool to coerce the state to change laws, share public assistance data and other state records, divert local resources to assist immigration arrests, and hold people in custody “for longer periods of time than otherwise allowed.”
The judge said the additional briefing was required because the coercion claim became clearer only after recent developments, including public statements by senior administration officials made after Minnesota sought emergency relief.
A key factor in the court’s analysis is a January 24 letter from US attorney general Pam Bondi to Minnesota governor Tim Walz, which Minnesota described as an “extortion.” In it, Bondi accuses Minnesota officials of “lawlessness” and demands what she calls “simple steps” to “restore the rule of law,” including turning over state welfare and voter data, repealing sanctuary policies, and directing local officials to cooperate with federal immigration arrests. She warned that the federal operations would continue if the state did not comply.
Immigration and Customs Enforcement and the Department of Justice did not immediately respond to a request for comment.
The case—State of Minnesota v. Noem—was brought by Minnesota attorney general Keith Ellison, Minneapolis, and St. Paul against Homeland Security secretary Kristi Noem and senior DHS, ICE, CBP, and Border Patrol officials.
At the hearing on Monday, lawyers for Minnesota and the cities argued that the federal deployment had crossed from investigating immigration violations into sustained street policing and “illegal” behavior, producing an ongoing public-safety crisis that warranted immediate limits. They pointed to fatal shootings by federal agents, the use of chemical agents in crowded areas, schools canceling classes or shifting online, parents keeping children home, and residents avoiding streets, stores and public buildings out of fear.
The plaintiffs argued that these were not injuries of the past but ongoing harms, and that waiting to litigate individual cases would leave the cities to absorb the violence, fear and disruption of an operation they do not control. The legal fight, they said, turns on whether the Constitution allows a federal operation to impose those costs and risks on state and local governments, and whether the conduct described in the record was isolated or so widespread that only immediate, court-ordered limits could restore basic order.
In filings, the plaintiffs describe an operation that DHS has publicly promoted as the “largest” of its kind in Minnesota, with the department claiming it deployed more than 2,000 agents into the Twin Cities; more than the combined number of sworn officers in Minneapolis and St. Paul. They argue the federal presence turned into day-to-day patrols in otherwise sleepy neighborhoods, with agents pulling over residents at random, detaining them on sidewalks, and making sweeping detentions without suspecting criminal conduct.
Tech
This Solar-Powered Smart Sprinkler Keeps My Lawn Watered Without Any Power Cables
Once configured, setup proceeds much like the Aiper and pricier Irrigreen apps: You create a zone, then use the app to define its boundaries. Similar to the aforementioned systems, Oto’s sprinkler is designed for precision watering, firing water in a beam in a single direction instead of a wide spray. That said, Oto’s spray is comparably narrow, only hitting a single, designated patch instead of producing a two-dimensional curtain of water like Irrigreen’s “water printing” system. You get a nice preview of this as you set the boundaries of your yard.
Like its competitors, Oto lets you set each zone as a spot (for watering a single tree, perhaps), a line (for a flowerbed), or a 2-D area (for a yard). I tested all of these modes but spent most of my time working with area zones, which are the most complex option. When defining an area zone, I found Oto’s system to be virtually identical to that of Irrigreen and Aiper, though ever so slightly slower to respond to commands. Even so, it’s very easy to use: A simple interface lets you drop points around the sprinkler to define the boundaries of the zone. When you’ve made a full circle around the sprinkler, the area is complete.
Once configured, you can assign each zone a schedule, with copious options available around which days to water (odd days, even days, select days of the week, every day), and designate a start time (though there is no tying time to sundown or sunrise). Each schedule also gets a weekly watering limit (in inches of depth), which you’ll then parse out over each week’s watering runs. Weather intelligence features let you elect to skip watering if your zip code receives measurable rainfall or if winds are high (both based on internet reports); the user can tweak both the amount of rain and windspeed needed to trigger a skip. The app logs the 20 most recent runs and includes a calendar that details upcoming events.
When watering an area, Oto takes a novel approach to covering the lawn, first moving in circular arcs directly around the sprinkler, then slowly increasing in range with each successive swipe. When finished, it does additional “clean-up” runs to hit any areas that the initial watering arcs didn’t reach. The speed is slow enough and the size of the water’s beam is large enough that the resulting coverage is solid. After test runs, I found the yard to be plenty wet across the entire zone, with no dry patches.
As with all sprinklers, changes in water pressure can make for occasional over- or underwatering of areas, but I found this to be a minimal problem when using the Oto. However, when watering at the terminus of Oto’s range, the power needed to throw the water that far can make for a strong splashdown, which may result in some soil erosion or damage to more sensitive plants.
The Oto also has a “play mode” option that lets you use the sprinkler for a watery game of chase or a more random “splash tag” mode, aka “try to avoid getting hit by the water.” Pro tip: It’s impossible not to get hit.
Tech
Why Is Your Grill So Dumb? The Best Grills Set Temp Like an Oven
It’s likewise smartly designed, packing up into—as you likely already gleaned—the shape of a suitcase. The heavy-duty handles and latches are strong. Though the Nomad is 28 pounds, which is a bit on the heavy side for a single-hand carry, the shape and large handle actually make it easier to carry than smaller and cheaper models.
The Nomad uses a dual-venting system to achieve good airflow, even when the lid is closed. The vents, combined with the raised fins on the bottom of the grill (which elevate your charcoal, allowing air to flow underneath), allow for very precise control of both high and low temperatures. If you live and die by overlanding, this grill could be your new constant companion.
Photograph: Weber
A Great Budget Portable Grill: WIRED reviewer Scott Gilbertson also loves the simple Weber Jumbo Joe ($90), a smaller version of the classic Original Kettle. It’s an easy choice for tailgates, especially. And if you want to use it at home, you can build yourself a stand for home cookouts. It’s low-cost, light, and dead simple. All are virtues.
Other Grills I Recommend
Recteq X-Fire Pro 825 for $1,400: Pellet smokers rarely crest much over 450 degrees Fahrenheit, which does not offer the sear you’d get on a charcoal or gas grill. But Recteq’s 825-square-inch, dual-pot X-Fire Pro wants to be your everything device, notes WIRED reviewer Kat Merck. In Smoke Mode, the left fire pot ignites for classic low-and-slow smoking. Switch the big knob to Grill Mode, and both pots fire up, with an adjustable damper over the right side. The damper, controllable with another knob, allows you to open access to the right fire pot just a little bit, or all the way to the gates of hell—1,200 degrees Fahrenheit. It takes about 20 minutes for the fire pot to get going this high, and if you don’t clean the fire pot first, it’ll kick off a lot of sparks in the process. Who knows why you need to get to 1,200 degrees? But as Merck notes, this is a company known for a cartoon bull logo and bull-horn handles. “Recteq likes to be extreme, so it tracks,” she says. If you keep your sear to a more human 600 degrees Fahrenheit, it’s a solid grill and sear experience. But keep in mind that the high power draw from the dual igniters will require a 10- or-12-gauge extension cord, which is probably better than the cord you’ve got at home. The X-Fire also didn’t produce the same smokiness as WIRED’s top-pick Recteq Flagship 1600, according to Merck’s testing, which means you’ll end up using smoke tubes at low temperature if you want to get more smoke in the meat. Note, too, that the advertised 20-pound pellet capacity is split between fire pots. This could mean refilling a 10-pound hopper multiple times during a long cook.
Photograph: Brad Bourque
Traeger Woodridge Pro for $1,000: The Traeger Woodridge Pro is WIRED’s previous top-pick pellet grill and smoker for most people. It still exists beautifully at the intersection of value and utility, and is likely to make you popular in the neighborhood. It’s a straightforward beast of a thing that’s easy to clean, easy to dial in for a perfect rack of ribs, and big enough to cook up two pork bellies at the same time. My new top-pick Recteq has a couple smart features that make us prefer it, like temperature history on its meat probes, and an easier learning curve on smart features. But this Woodridge will still make you quite popular in the neighborhood.
Photograph: Traeger
Traeger Timberline Wi-Fi Wood Pellet Grill for $3,300: If you’re serious about grilling and smoking, Traeger’s Timberline is almost a step up from a smoker. It’s the perfect all-in-one outdoor kitchen. It uses the same wireless smoking smarts as the Woodridge but adds some extras, like an induction burner (perfect for adding a last-minute sear with a cast-iron pan or steaming some veggies). The insulated smoke box has room for six pork shoulders, or about the equivalent racks of ribs or chickens. Former WIRED editor Parker Hall has managed to feed hundreds of people using it. (As a longtime food and barbecue critic, I can vouch heartily for Hall’s resulting brisket and ribs.) If that’s not enough, there’s also an XL version that’s even bigger. “All of my meats heated evenly and were perfectly cooked right when the smoker said they would be,” Hall says. If you want flawless smoking from the comfort of your couch and price is not a factor, the Timberline delivers.
Courtesy of Masterbuilt
Masterbuilt Gravity Series 800 for $899: This spacious Masterbuilt offers a nice combination, notes WIRED reviewer Chris Smith: charcoal flavor with the temperature precision of gas or electricity. The large, top-loading charcoal hopper uses gravity (hence the name) to feed heat into an internal housing, and an integrated fan enables precise digital temperature control—on the device or via the app. You’ll reach 700 degrees Fahrenheit within 15 minutes. Temperatures are remarkably consistent once stabilized, and if you want to add smoke flavor, just throw wood chunks into the ash bin and let falling charcoal embers do the rest. But the versatility comes with caveats. You may miss the ability to sear directly over a flame, and you’ll need to change out the internal housing before switching to the flat-top grill.
Courtesy of Yoder
Yoder YS640S Pellet Smoker for $2,700: Most grills do one thing well and several others poorly or not at all. Yoder’s YS640S is a more versatile tool, thanks to a design that allows easy access to the auto-feed firebox. Like Traegers that are half the price, this Kansas-made grill uses an electric fan and an auger to feed wood pellets in for a slow smoke session. It’s all driven by a control board that sends temp alerts and allows you to adjust the temperature via Wi-Fi. As a smoker, it easily handled ribs and a chuck roast, holding the temperature better than most. This is thanks to its bomb-proof 10-gauge steel construction, which means this grill weighs as much as a refrigerator. Where the Yoder really stands out, though, is as a grill and possible pizza oven. By removing a steel plate positioned over the fire pit, you can sear burgers directly over the flame or remove the grills and plop on a hefty pizza oven attachment ($489), which uses the pellet feed system to maintain a constant 900-plus degrees Fahrenheit.
A Grill to Avoid
Courtesy of Ace
Kamado Joe Konnected Joe for $1,900: There’s a lot to like about this kamado-style grill. Indeed, WIRED previously recommended it for its electric ignition and Wi-Fi connectivity that allows you to measure the temperature of the interior and the meat via two probes. But over long-term use, WIRED commerce director Martin Cizmar has had constant problems with the electric grill tripping the 2-year-old GFCI outlets on his patio. Once it even tripped the breaker. A Reddit thread reveals this is a common problem. Like the Redditors, Cizmar found temporary relief by running an extension cord into an outlet in his kitchen, but even that has failed him a few times during testing. Unfortunately, this grill is a hard pass until the issue is resolved.
Tech
The First Atomic Bomb Test in 1945 Created an Entirely New Material
During the Trinity nuclear test on July 16, 1945, in the New Mexico desert—the world’s very first test of an atomic bomb—a new material spontaneously formed. It was discovered only recently, by an international research team coordinated by geologist Luca Bindi at the University of Florence, which identified the novel clathrate based on calcium, copper, and silicon. It’s a material never before observed either in nature or as an artificial compound created in the laboratory.
What Are Clathrates?
The term “clathrates” denotes materials characterized by a “cage-like” structure that traps other atoms and molecules inside, giving them unique properties. Of great technological interest, these materials are being studied for various applications ranging from energy conversion (as thermoelectric materials capable of transforming heat into electricity) to the development of new semiconductors, to gas storage and hydrogen for future energy technologies.
The New Material
To discover the new material, researchers focused on trinitite, a silicate glass containing rare metallic phases. Using some techniques like x-ray diffraction, the team was able to identify a type I clathrate based on calcium, copper, and silicon within a tiny copper-rich metal droplet embedded in a sample of red trinitite.
The new material, the researchers say, formed spontaneously during a nuclear explosion. This indicates that the extreme conditions, such as extremely high temperatures and pressures, can generate new materials that are impossible to obtain by traditional methods.
Natural Laboratories
The discovery is even more interesting because in the same detonation event another very rare material was formed: a silicon-rich quasicrystal, already documented by the team of experts led by Bindi a few years ago.
A quasicrystal, as Bindi told WIRED at the time, is something that is not a crystal, but looks a lot like one. “Their peculiarity,” he said, “is that the atomic arrangement that is not periodic, but nearly so, creates incredible symmetries from which derive amazing physical properties, among other things, very difficult to predict.”
Establishing the link between these structures therefore helps scientists better understand how atoms organize under extreme conditions and expand the possibilities for designing new materials. “Events such as nuclear explosions, lightning strikes, or meteoritic impacts function as true natural laboratories,” the researchers explain. “They allow us to observe forms of matter that we cannot easily reproduce in the laboratory.”
In essence, this research opens new vistas for the development of innovative technologies, demonstrating that even destructive events can bequeath discoveries useful for the future.
This story originally appeared in WIRED Italia and has been translated from Italian.
-
Entertainment5 days agoConan O’Brien hat tricks as Oscar host
-
Tech1 week agoCould Contact-Tracing Apps Help With the Hantavirus? Not Really
-
Tech1 week agoI Tried the Best Captioning Smart Glasses, and Only One Leads the Pack
-
Fashion5 days agoItaly’s Zegna Group’s Q1 growth boosted by strong organic performance
-
Sports1 week agoBobby Cox, legendary Atlanta Braves manager who led 1995 World Series champions, dead at 84
-
Entertainment1 week agoMartin Short: Facing tragedy with joy
-
Entertainment1 week agoTom Brady gets back at Kevin Hart during Netflix roast
-
Entertainment1 week agoMartha Stewart: How to make an omelet


-Reviewer-Photo-SOURCE-Brad-Bourque.jpg)



