Tech
UVC LEDs for disinfection on the way to widespread use
An international team of researchers has, for the first time, comprehensively assessed the state of the art of commercial UVC LEDs and summarized the findings in an open-access review. These compact, efficient, and mercury-free UV light sources are considered a key technology for future disinfection and sterilization systems. The study is published in the Journal of Physics: Photonics.
The paper provides an overview of the performance and particular characteristics of the technology, offering solid data to help to open up both existing and new UVC applications with LEDs.
Ultraviolet (UV) light can inactivate pathogens on surfaces, in the air, and in water. Light-emitting diodes (LEDs) operating in the UVC spectral range at wavelengths below 280 nanometers are gaining importance thanks to rapid advances in efficiency and lifetime.
In contrast to conventional UV lamps, they are extremely compact, dimmable, capable of fast switching, and, most importantly, free of mercury. Researchers from the Ferdinand-Braun-Institut (FBH) in Berlin, together with four other institutions, investigated UVC LEDs from 14 manufacturers over a period of two years, covering devices with wavelengths between 260 and 280 nanometers.
The review provides, for the first time, a comprehensive overview of current performance and reliability, thereby bridging the gap between manufacturer’s and user’s perspective.
“Our data support both manufacturers and end-users in making well-informed decisions for the development and deployment of UVC LED systems,” explains Dr. Jan Ruschel, one of the lead authors and a researcher at FBH.

Applications from water purification to air cleaning
UVC LEDs open up a wide range of everyday applications: from environmentally friendly drinking water treatment and air purification in schools and hospitals to the disinfection of refrigerators, dishwashers, touchscreens, and production facilities in the food industry.
In regions without stable power supply, their compact design and low energy requirements enable mobile, solar-powered solutions. Unlike the low-pressure UV lamps that are still commonly used today, UVC LEDs do not contain toxic mercury, show relatively low sensitivity of emission properties to temperature changes, and often have longer lifetimes already.
A guide for manufacturers and users
The paper surveys key parameters of UVC LEDs available on the market that are critical for developing disinfection systems. Both lifetime and efficiency vary significantly—depending on operating conditions, design, and manufacturer. The researchers address thermal, optical, and electrical effects, and how these can be influenced through material selection and operating parameters.
Among other factors, the package type plays an important role. A particular focus is placed on lifetime studies in the form of long-term stress tests under various conditions. Users who want to integrate UVC LEDs into their systems can use this information to derive how cooling, power control, optics, and LED monitoring should be designed.
“With this, we have successfully closed the gap between laboratory research and practical application,” emphasizes Ruschel. “As an application-oriented research institute, it is of special importance to us that innovations truly find their way into real-world use.”
More information:
Grigory Onushkin et al, Efficiency- and lifetime-limiting effects of commercially available UVC LEDs: a review, Journal of Physics: Photonics (2025). DOI: 10.1088/2515-7647/adebcb
Citation:
UVC LEDs for disinfection on the way to widespread use (2025, September 16)
retrieved 16 September 2025
from https://techxplore.com/news/2025-09-uvc-disinfection-widespread.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.
Tech
The Doomsday Glacier Is Getting Closer and Closer to Irreversible Collapse
Known as the “Doomsday Glacier,” the Thwaites Glacier in Antarctica is one of the most rapidly changing glaciers on Earth, and its future evolution is one of the biggest unknowns when it comes to predicting global sea level rise.
The eastern ice shelf of the Thwaites Glacier is supported at its northern end by a ridge of the ocean floor. However, over the past two decades, cracks in the upper reaches of the glacier have increased rapidly, weakening its structural stability. A new study by the International Thwaites Glacier Collaboration (ITGC) presents a detailed record of this gradual collapse process.
Researchers at the Centre for Earth Observation and Science at the University of Manitoba, Canada, analyzed observational data from 2002 to 2022 to track the formation and propagation of cracks in the ice shelf shear zone. They discovered that as the cracks grew, the connection between the ice shelf and the mid-ocean ridge weakened, accelerating the upstream flow of ice.
The Crack in the Ice Shelf Widens in Two Stages
The study reveals that the weakening of the ice shelf occurred in four distinct phases, with crack growth occurring in two stages. In the first phase, long cracks appeared along the ice flow, gradually extending eastward. Some exceeded 8 km in length and spanned the entire shelf. In the second phase, numerous short cross-flow cracks, less than 2 km long, emerged, doubling the total length of the fissures.
Analysis of satellite images showed that the total length of the cracks increased from about 165 km in 2002 to approximately 336 km in 2021. Meanwhile, the average length of each crack decreased from 3.2 km to 1.5 km, with a notable increase in small cracks. These changes reflect a significant shift in the stress state of the ice shelf, that is, in the interaction of forces within its structure.
Between 2002 and 2006, the ice shelf accelerated as it was pulled by nearby fast-moving currents, generating compressive stress on the anchorage point, which initially stabilized the shelf. After 2007, the shear zone between the shelf and the Western ice tongue collapsed. The stress concentrated around the anchorage point, leading to the formation of large cracks.
Since 2017, these cracks have completely penetrated the ice shelf, severing the connection to the anchorage. According to researchers, this has accelerated the upstream flow of ice and turned the anchorage into a destabilizing factor.
Feedback Loop Collapse
One of the most significant findings of the study is the existence of a feedback loop: Cracks accelerate the flow of ice, and in turn, this increased speed generates new cracks. This process was clearly recorded by the GPS devices that the team deployed on the ice shelf between 2020 and 2022.
During the winter of 2020, the upward propagation of structural changes in the shear zone was particularly evident. These changes advanced at a rate of approximately 55 kilometers per year within the ice shelf, demonstrating that structural collapse in the shear zone directly impacts upstream ice flow.
Tech
Grado’s Signature S750 Headphones Sound Modern but Feel Like the ’70s
The friction-pole mechanism for headband adjustment is no less agricultural, for all its familiarity where Grado headphone designs are concerned. And while the detachable cable is a fair bit more flexible than some older Grado models, that’s not the same as saying it’s meaningfully flexible. If there’s a more willfully unhelpful length of cable in all of headphone-land, I’ve yet to encounter it.
On the subject of the cable: Grado provides 180-ish centimeters of it with a 6.3-mm termination at the end. When you’re charging this sort of money for headphones, it’s not outlandish to imagine your customer might have a device that accepts a balanced connection. Frankly, why there isn’t a choice of cables in the packaging is, frankly, beyond me. It’s something that the overwhelming majority of Grado’s rivals provide as a matter of course, and though the company’s website suggests there are forthcoming cable options “including a variety of lengths, as well as balanced terminations such as 4-pin XLR and 4.4mm,” these have been “forthcoming” for quite some time now, and will have a cost attached.
Photograph: Simon Lucas
I’m in no position to doubt the effectiveness of the “B” ear cushions where sound quality is concerned. After all, the Signature S750 sound superb, and Grado suggests the cushion design is a contributing factor. What I do feel qualified to say, though, is that the raw-feeling foam of the ear cushions is not especially comfortable, and that it retains and returns the wearer’s body heat with something approaching glee. “Premium” and “luxurious” are not words that apply.
Ultimately, it depends on what your priorities are. There’s certainly no arguing with the way the Signature S750 sound. They’re uncomplicatedly impressive and periodically quite thrilling to listen to, depending on the mix. But unless you’re one of those hair-shirt hi-fi fundamentalists from back in the day, one of those listeners who somehow doesn’t believe outstanding sound quality is valid unless there’s some suffering attached, there may well be too many shortcomings to overlook when it comes to these Grados. “Hand-assembled in Brooklyn, USA” notwithstanding.
Tech
The Future of EVs Is Foggy—but California Still Wants More of Them
It’s been a weird and confusing few weeks for the auto industry—especially for those who hoped to see more batteries on the road in the coming decade.
Just this month: Ford announced a retrenchment in its EV business, canceling some battery-powered vehicle plans and delaying others; the European Commission proposed to backtrack its goal to transition fully to zero-emission cars by 2035; the US government said it would loosen rules that would have required automakers to ratchet up the fuel economy of their fleets. BloombergNEF projects 14 million fewer EVs will be sold in the US by 2030 than it did last year—a 20 percent drop.
What has not changed, it seems, is California’s interest in shifting to cleaner transportation. “The state is doubling down on our zero-emission vehicle deployment, providing market certainty, and continuing to lead on clean transportation regardless of policy reversals elsewhere or shifts by automakers,” Anthony Martinez, a spokesperson for Governor Gavin Newsom, wrote in a statement to WIRED. He said the governor’s “commitment to accelerating California’s clean transportation transition hasn’t changed.”
In 2020, Newsom became one of the first lawmakers in the world to commit to full electrification when he signed an executive order directing state agencies to create rules that would ban the sale of new gas-powered cars in the state by 2035. Those rules eventually aimed to ratchet up the share of battery-electric vehicles, with an ultimate goal of a mix of pure EVs and plug-in hybrids. (The PHEVs could only account for about 20 percent of sales.) Several other states, including Massachusetts, New York, Oregon, and Washington State, pledged to do the same.
Earlier this year, the GOP-led Congress revoked, through legislation, California’s power to set its own clean air regulations. The state responded with a lawsuit, which is still being argued. Meanwhile, Newsom signed another executive order directing state agencies to further the state’s electrification goals in other ways.
Now auto industry experts and players say the state’s determination to push through policy and market changes to meet its now half-decade-old goal may be overly ambitious.
“Getting to 100 percent might be challenging,” says Stephanie Valdez Streaty, the director of industry insights at Cox Automotive. “There are a lot of headwinds.”
A coalition of California business groups have argued that the state’s goals even for next year—a requirement that 35 percent of model year 2026 vehicles sold are zero-emission—aren’t realistic, and that California should push back its goals for zero-emission new car sales. (Enforcement of the rules is paused while the larger battle with US Congress plays out.) Zero-emission cars accounted for 21 percent of the overall annual state new car sales as of the fall, according to the California New Car Dealers Association, well below the 35 percent goal. “The timeline needed to be adjusted,” says the group’s president, Brian Maas.
-
Business1 week agoHitting The ‘High Notes’ In Ties: Nepal Set To Lift Ban On Indian Bills Above ₹100
-
Business1 week agoStudying Abroad Is Costly, But Not Impossible: Experts On Smarter Financial Planning
-
Business1 week agoKSE-100 index gains 876 points amid cut in policy rate | The Express Tribune
-
Sports1 week agoJets defensive lineman rips NFL officials after ejection vs Jaguars
-
Fashion4 days agoIndonesia’s thrift surge fuels waste and textile industry woes
-
Business4 days agoBP names new boss as current CEO leaves after less than two years
-
Tech1 week agoFor the First Time, AI Analyzes Language as Well as a Human Expert
-
Entertainment7 days agoPrince Harry, Meghan Markle’s 2025 Christmas card: A shift in strategy
