Connect with us

Tech

This Kit Turns Your Insta360 Action Camera Into a Point-and-Shoot

Published

on

This Kit Turns Your Insta360 Action Camera Into a Point-and-Shoot


The final exposure control feature is one I use a lot, and it’s exposure compensation. This works with the auto exposure and can be used to combat the tendency to go too slow with the shutter speed be forcing the Ace Pro 2 to underexpose the image. The exposure comp here is the best among action cameras, running from –4 stops to + 4 stops in ⅓-stop increments. I set the Xplorer Grip to control EV, so when I am in auto mode, the dial is an exposure comp dial just like “real” camera. (The dial can also be set to control ISO, shutter speed, shooting mode, filter selection, and white balance.)

Even better, if you’re in manual mode and you want to go back to auto, the first click of the dial will open the side panel, the second will switch from manual to auto, the third will start adjusting your exposure value. This is a really fast way to get from a carefully composed exposure back to full auto without needing to get into the touchscreen menus.

The final thing worth mentioning is the included Leica color profiles. If you haven’t updated your firmware recently, you should. Insta360 has added a few more of these. Because I shoot RAW, I don’t use these much, but as color profiles go these are great, especially the new Leica high-contrast black and white, which is what I’ve been using most of the time. This way I get a black-and-white JPG and a full-color RAW file.

To be honest, I did not have high hopes for the Xplorer Grip Pro Kit. For me, action cameras have primarily been for shooting around water, and while that still works with the bare camera, it doesn’t with the grip. However, I was pleasantly surprised using the Ace Pro 2 with the Xplorer grip as an everyday camera.

I would say it’s best thought of as a compliment to your existing “real” camera. It’s not going to replace your interchangeable lens camera. It could replace your point-and-shoot, but I haven’t done that, because sometimes I want a pocket camera with a 28mm lens. Instead, the Ace Pro 2 with the grip has become an extra camera that I bring along when I want a wide angle or fisheye look and don’t feel like lugging a big, heavy, fast, full-frame, ultrawide lens.



Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

Papa Johns Is Getting Into Drone Delivery—but Not for Pizza

Published

on

Papa Johns Is Getting Into Drone Delivery—but Not for Pizza


Starting today, eager customers of the US pizza restaurant chain Papa Johns living in one corner of southern North Carolina will have the opportunity to receive their food from the sky, thanks to a new collaboration with Alphabet’s drone company, Wing. But Papa Johns’ signature pizzas won’t be on offer. Instead, drone-loving North Carolinians will have to choose between three kinds of sandwiches, a newer product for the fast-food chain: Philly cheesesteak, chicken bacon ranch, or steak and mushroom varieties.

Drone deliveries are popping up in more communities across the US and the world. Questions about the long-term economics and regulatory picture around unmanned aerial vehicles persist, but Wing boasts partnerships with Walmart, Panera, and DoorDash and is delivering through the sky to customers in four metro areas: Atlanta, Charlotte, Dallas-Fort Worth, and Houston. (In 2019, Wing received the US Federal Aviation Administration’s first certificate allowing a drone delivery company to operate in the country.) Competing drone companies, including Zipline, Amazon Prime Air, and Flytrex, fly packages, medical supplies, and Chipotle burritos in select communities across countries like Ghana, Japan, and the US.

But until very recently, drone operators have struggled to fly full-size pizzas. For companies hoping to break into the food delivery space, this is unfortunate: 11 percent of the US population eats a slice on any given day, according to the US Department of Agriculture. In a fast-diversifying restaurant industry, getting them to customers is still big business. But the realities of physics, engineering, and the restaurant business conspire to make pizzas a challenge for drones.

Flying Pizzas

Traditionally, pizza is the experimental tech delivery of choice. The familiar and cheap cheese-sauce-bread combo has been loaded onto self-driving cars and autonomous sidewalk delivery vehicles and has been assembled by robots. It’s a fast and satisfying option, especially for busy families tight on time. And theoretically, a great fit for automated drones, among one of the faster delivery options—people love fresh, piping-hot pizza.

But transporting one by drone requires some extra work, says Wing CEO Adam Woodworth. “Pizza comes in a very different box, with a big, flat surface area,” he says. They’re not naturally aerodynamic. Also, “you don’t want a pizza tilted.”

Wing’s relatively lightweight drones are engineered to carry three specific package sizes; right now, pizza boxes aren’t one of them. Woodworth says a new design is on the horizon. “I want to see pizzas coming at me from the sky,” he says.

Flytrex, an Israel-based drone delivery company, announced late last month that it had finally solved the problem. In collaboration with rival pizza chain Little Caesars, the company began delivering via drone up to two large pizzas (16 inches each), plus sodas and bread, in Wylie, Texas, a suburb of Dallas. The leap comes courtesy of a much bigger new drone, capable of carrying up to 8.8 pounds for four miles.

Courtesy of Flytrex



Source link

Continue Reading

Tech

Chevron Wants a School District Tax Break for a Data Center Power Plant in Texas

Published

on

Chevron Wants a School District Tax Break for a Data Center Power Plant in Texas


A major oil company is seeking a state tax break in Texas worth hundreds of millions of dollars to build a massive power plant. The energy won’t be going to residential customers, though. Instead, the gas plant will be used to power a data center whose eventual tenant could be Microsoft.

Chevron subsidiary Energy Forge One has filed an application with the State Comptroller’s board to obtain a tax abatement for a power plant it’s building in West Texas. In late January, the comptroller’s office made a recommendation to support the application’s approval—the first such approval under the program for a power plant intended solely for data center use.

In March, following news reports that Microsoft was looking into purchasing power from the Energy Forge project, Chevron said that it had entered into an “exclusivity agreement” with Microsoft and Engine 1, an investment fund involved in the project. In January, Microsoft pledged to be a “good neighbor” in communities where it is building data centers, including promising to pay a “full and fair share of local property taxes.”

The potential tax abatement for the project comes as big tech companies are battling rising public fury about data centers and electricity costs. It also comes as lawmakers start to cast a more critical eye on ballooning incentives for data centers, some of which have cost some states—including Texas—$1 billion or more each year.

Chevron spokesperson Paula Beasley told WIRED in an email that all tax incentives under consideration for the Energy Forge project “apply solely to the power generation facility” to “support new energy infrastructure, and do not extend to any future data center facilities that may be served.” Beasley also said that there is currently “no definitive agreement” with Microsoft for this power plant.

“Microsoft is in discussions with Chevron,” Rima Alaily, Microsoft’s corporate vice president and general counsel for infrastructure, said in a statement to WIRED. “No commercial terms have been finalized, and there is no definitive agreement at this time.”

Chevron is applying for a tax abatement for the project under Texas’ Jobs, Energy, Technology, and Innovation (JETI) Act. Passed in 2023, the program is intended to incentivize businesses to build large infrastructure projects in the state in exchange for guarantees to bring jobs and revenue. Accepted projects get a cap set on the amount of taxable property they can be charged through local school district taxes.

The Pecos-Barstow-Toyah school board approved the project’s application at a meeting in February. The state pays for the tax abatement, so the school district itself does not lose out on any money.

According to documents from the state, the Chevron project could net more than $227 million in savings for the company over a 10-year period, depending on the eventual size of the project and investment. The application says the plant will provide “over 25 permanent, full-time jobs,” though there’s no requirement to do so because it’s considered an electricity generation facility.

The planned gas plant won’t connect to the grid, instead providing “electricity for direct consumption by a data center,” according to its application. So-called behind-the-meter gas plants have become increasingly popular for data center developers facing yearslong waits to connect to the grid. According to data from nonprofit Global Energy Monitor, the US at the start of the year had nearly 100 gigawatts of gas-fired power in the development pipeline solely to power data centers, with several more massive gas projects announced since the data was published.

A WIRED analysis of less than a dozen power plants being constructed to explicitly serve data centers, including the Chevron project, found that these power plants are permitted to emit more greenhouse gases than many small- to medium-size countries. The Energy Forge plant alone could emit more than 11.5 million tons of CO2 equivalent annually—more than the country of Jamaica emitted in 2024. Beasley told WIRED that the plant “is being designed to comply with applicable environmental regulations, including all applicable federal and state air quality standards.”



Source link

Continue Reading

Tech

CUDA Proves Nvidia Is a Software Company

Published

on

CUDA Proves Nvidia Is a Software Company


Forgive me for starting with a cliché, a piece of finance jargon that has recently slipped into the tech lexicon, but I’m afraid I must talk about “moats.” Popularized decades ago by Warren Buffett to refer to a company’s competitive advantage, the word found its way into Silicon Valley pitch decks when a memo purportedly leaked from Google, titled “We Have No Moat, and Neither Does OpenAI,” fretted that open-source AI would pillage Big Tech’s castle.

A few years on, the castle walls remain safe. Apart from a brief bout of panic when DeepSeek first appeared, open-source AI models have not vastly outperformed proprietary models. Still, none of the frontier labs—OpenAI, Anthropic, Google—has a moat to speak of.

The company that does have a moat is Nvidia. CEO Jensen Huang has called it his most precious “treasure.” It is not, as you might assume for a chip company, a piece of hardware. It’s something called CUDA. What sounds like a chemical compound banned by the FDA may be the one true moat in AI.

CUDA technically stands for Compute Unified Device Architecture, but much like laser or scuba, no one bothers to expand the acronym; we just say “KOO-duh.” So what is this all-important treasure good for? If forced to give a one-word answer: parallelization.

Here’s a simple example. Let’s say we task a machine with filling out a 9×9 multiplication table. Using a computer with a single core, all 81 operations are executed dutifully one by one. But a GPU with nine cores can assign tasks so that each core takes a different column—one from 1×1 to 1×9, another from 2×1 to 2×9, and so on—for a ninefold speed gain. Modern GPUs can be even cleverer. For example, if programmed to recognize commutativity—7×9 = 9×7—they can avoid duplicate work, reducing 81 operations to 45, nearly halving the workload. When a single training run costs a hundred million dollars, every optimization counts.

Nvidia’s GPUs were originally built to render graphics for video games. In the early 2000s, a Stanford PhD student named Ian Buck, who first got into GPUs as a gamer, realized their architecture could be repurposed for general high-performance computing. He created a programming language called Brook, was hired by Nvidia, and, with John Nickolls, led the development of CUDA. If AI ushers in the age of a permanent white-collar underclass and autonomous weapons, just know that it would all be because someone somewhere playing Doom thought a demon’s scrotum should jiggle at 60 frames per second.

CUDA is not a programming language in itself but a “platform.” I use that weasel word because, not unlike how The New York Times is a newspaper that’s also a gaming company, CUDA has, over the years, become a nested bundle of software libraries for AI. Each function shaves nanoseconds off single mathematical operations—added up, they make GPUs, in industry parlance, go brrr.

A modern graphics card is not just a circuit board crammed with chips and memory and fans. It’s an elaborate confection of cache hierarchies and specialized units called “tensor cores” and “streaming multiprocessors.” In that sense, what chip companies sell is like a professional kitchen, and more cores are akin to more grilling stations. But even a kitchen with 30 grilling stations won’t run any faster without a capable head chef deftly assigning tasks—as CUDA does for GPU cores.

To extend the metaphor, hand-tuned CUDA libraries optimized for one matrix operation are the equivalent of kitchen tools designed for a single job and nothing more—a cherry pitter, a shrimp deveiner—which are indulgences for home cooks but not if you have 10,000 shrimp guts to yank out. Which brings us back to DeepSeek. Its engineers went below this already deep layer of abstraction to work directly in PTX, a kind of assembly language for Nvidia GPUs. Let’s say the task is peeling garlic. An unoptimized GPU would go: “Peel the skin with your fingernails.” CUDA can instruct: “Smash the clove with the flat of a knife.” PTX lets you dictate every sub-instruction: “Lift the blade 2.35 inches above the cutting board, make it parallel to the clove’s equator, and strike downward with your palm at a force of 36.2 newtons.”



Source link

Continue Reading

Trending