Exports increased by 1.9 per cent year on year (YoY) and imports rose by 7.2 per cent YoY in the month, according to provisional data.

German exports in March were up by 0.5 per cent month on month (MoM) and imports rose by 5.1 per cent MoM on a calendar- and seasonally-adjusted basis.
Exports increased by 1.9 per cent YoY and imports rose by 7.2 per cent YoY in the month.
Most German exports in March this year went to the US, with goods exports totalling €11.2 billion—a drop of 7.9 per cent MoM and 21.4 per cent YoY.

After calendar and seasonal adjustment, Germany exported goods to the value of €135.8 billion and imported goods to the value of €121.5 billion in March. The foreign trade balance thus showed a surplus of €14.3 billion in the month.

The calendar- and seasonally-adjusted foreign trade balance stood at €19.6 billion in February this year. In March 2025, the balance was €19.9 billion.

On a calendar- and seasonally-adjusted basis, Germany exported goods worth €78.4 billion to the member states of the European Union (EU) in March, while it imported goods to the value of €61 billion from these countries during the period.

Calendar- and seasonally-adjusted exports to EU countries rose by 3.4 per cent MoM and imports from these countries increased by 3 per cent MoM in March.

The value of the goods exported to euro area countries in March totalled €54.8 billion (plus 4.1 per cent MoM), and the value of the goods imported from these countries was €40.8 billion euros (plus 1.7 per cent MoM).

Goods worth €23.6 billion (plus 1.7 per cent MoM) were exported to EU countries not belonging to the euro area, while the value of the goods imported from those countries was €20.1 billion (plus 5.7 per cent MoM).

Exports of goods to countries outside the EU (third countries) in the month amounted to €57.4 billion, while imports from those countries totalled €60.5 billion on a calendar- and seasonally-adjusted basis. Compared with February 2026, exports to third countries fell by 3.3 per cent and imports from those countries increased by 7.4 per cent.

Most German exports in March this year went to the United States, with goods exports totalling €11.2 billion after seasonal and calendar adjustment—a drop of 7.9 per cent MoM and 21.4 per cent YoY.

Month on month, exports to the United Kingdom rose by 3.2 per cent to €7.4 billion. In March, exports to China decreased by 1.8 per cent MoM to €6 billion.

Most imports in March 2026 came from China. Goods to the value of €15.6 billion were imported from there, after calendar and seasonal adjustment. This was an increase of 4.9 per cent MoM.

Imports from the United States dropped by 3.7 per cent MoM to €8.0 billion. Imports from the United Kingdom increased by 11.7 per cent MoM to €3.5 billion during the same period.

Fibre2Fashion News Desk (DS)

FESPA has announced the launch of its next Print Census, which will spotlight the voices of printers on key topics shaping the industry today. The Print Census is a global research initiative designed to gather and share essential market intelligence for the print and sign communities. It takes place twice each year and is run in collaboration with FESPA’s Thought Leadership Partner, Keypoint Intelligence.

FESPA’s 2025 Print Census shows speciality print firms recognise the need for automation, AI and sustainability, but adoption remains uneven due to limited resources and smaller business sizes.
Nearly half of PSPs still lack automation, around 40 per cent do not use AI, and only 40 per cent treat sustainability as a strategic priority despite growing regulatory and customer pressures.

First launched in 2015, the Print Census supports FESPA’s commitment to providing its members and the wider speciality print community with actionable, data-driven insights that facilitate innovation, productivity, growth and resilience.  

The new 2026 Print Census will focus on: E-Commerce and Web-to-Print; Workforce and Skills Gaps; and Growth Applications, Pricing Pressures and Profitability.

In addition, FESPA has announced the results of its previous Print Census, which took place in the latter half of 2025. The topics explored in the 2025 Print Census, which was the first in the new format and the first survey since 2018, were: Automation, AI and Sustainability Survey.

All members of FESPA Direct or an Association can access the full 2025 FESPA Print Census report, on Automation, AI and Sustainability, on the FESPA website.

2025 Print Census key findings

• Business size: 75% of print businesses have fewer than 50 employees, limiting investment capacity and slowing adoption of new technologies
• Automation: Essential, but underused. Nearly half of PSPs report no automation in place, despite growing pressure from labour shortages and demand for faster, digital workflows
• AI: Around 40% of PSPs are not using AI at all, with most current use limited to basic applications like design and colour management
• Sustainability: While 92% of businesses say sustainability is important, only 40% have made it a core strategic priority
• Cost and weak demand: Higher material costs and limited customer demand continue to slow sustainable adoption, particularly for smaller firms
• Clear disconnect between innovation and adoption: While suppliers are advancing automation, AI and sustainable solutions, many PSPs lack the resources, knowledge or infrastructure to implement them

2025 Print Census Executive Summary

Drawing on insights from 774 businesses across 89 countries, the 2025 Print Census study explored how companies are approaching three key areas: automation, artificial intelligence (AI) and sustainability. The findings reveal that those in the industry understand its need to advance, but businesses are progressing at different speeds due to variations in size and resources.

A defining feature of the sector is its structure. Small and micro businesses dominate, with 75% of respondents saying they employ fewer than 50 people and nearly half having 10 or fewer employees. For many businesses, their size impacts the pace at which they can change. Many of these businesses operate with limited capacity, so immediate operational pressures are prioritised over long-term transformation.

This reality is reflected across businesses’ automation, AI and sustainability practices, where, according to the Print Census responses, awareness is high, but implementation is uneven.

Automation take-up

Automation is being used by print businesses to improve efficiency, consistency and scalability. It offers a clear route to addressing labour shortages, rising costs and increasing demand for faster turnarounds. However, adoption of automation processes remains limited, particularly for smaller print service providers (PSPs) – with nearly half reporting no use of automation tools at all. For many PSPs, automation is still viewed as a longer-term investment rather than an immediate priority.

Automation, when it is used by PSPs, typically covers workflow tools, web-to-print platforms and prepress processes. When used in these areas, automation delivers tangible benefits without major disruption to production. However, when it comes to implementing more advanced and costly automation solutions, a gap is created between those able to scale digitally and those still reliant on manual processes.

AI in action

While interest in artificial intelligence is growing, practical adoption is not yet widespread. Around 40% of PSPs report that they are not yet using AI in any capacity. In cases where it is being used, it’s limited to specific functions such as design support, colour management or basic scheduling. Although these applications provide quick wins, they are rarely integrated into wider production workflows.

The barriers that print businesses face when trying to adopt AI are largely practical because many businesses lack in-house expertise, clear starting points, or the time to explore new tools. For smaller teams in particular, uncertainty around how to apply AI and measure its value continues to slow progress.

Spotlight on sustainability

Sustainability presents a more complex picture. Most PSPs (92%) say that it matters to their business, however, only 40% describe it as a core strategic priority. This shows there is a gap between intent and action.

Cost is the most significant barrier. Smaller firms face higher material costs and limited purchasing power, so it may be more difficult to justify green options. At the same time, demand for sustainability, from customers, is still relatively low, which reduces the commercial incentive to invest. As a result, for many, sustainability is an aspiration, rather than a fully embedded operational focus.

Despite this, external pressures – such as regulatory requirements, supply chain expectations and procurement standards are advancing – are increasing, which means that sustainability is likely to become less optional over time. Businesses will need to move from awareness about sustainability, to measurable action.

Gaps in the market

The FESPA Print Census report shows that across all three areas – Automation, AI and Sustainability – there is a pattern: gaps between what is available and what is being implemented. Suppliers and manufacturers continue to develop more advanced solutions, but many PSPs lack the resources, knowledge or infrastructure to adopt them effectively.

Yet, these gaps represent opportunities, as there is evidently growing demand for solutions that are accessible, modular and tailored to smaller businesses. Lower-cost entry points, better education and clearer demonstration of value could help to accelerate adoption across the sector.

Printers also report that consumer behaviour is shifting. Digital-first ordering and increased demand for transparency are factors that are changing how print businesses operate. Businesses that can respond to their customers with more connected, data-driven workflows will be better positioned to compete.

Join our global speciality print network to get exclusive access to the Understanding and Avoiding Greenwash guide.?Become a member today and join our network of over 14,000 members worldwide giving you access to the FESPA members platform.?We have 37 national Associations, if your country is not listed, you will become a FESPA Direct member.

Note: The headline, insights, and image of this press release may have been refined by the Fibre2Fashion staff; the rest of the content remains unchanged.

Fibre2Fashion News Desk (MS)

Developed at an investment of ₹16.95 billion (~$178 million), it is the country’s first functional PM MITRA Park and operationalises the government’s 5F vision—farm to fibre to factory to fashion to foreign.

Indian PM Narendra Modi inaugurated the PM MITRA Park at Warangal in Telangana yesterday.
Developed at an investment of $178 million, it is the first functional PM MITRA Park and operationalises the government’s 5F vision—farm to fibre to factory to fashion to foreign.
Strategically located near the proposed Nagpur-Vijayawada Greenfield Expressway and close to NH-163, it offers multimodal connectivity.

Inaugurating the project, Modi said the park will accelerate the textile revolution in the country, creating large-scale employment opportunities, especially for women.

Strategically located near the proposed Nagpur-Vijayawada Greenfield Expressway (NH-163G) and in proximity to NH-163, the park offers excellent multimodal connectivity to major railway networks and seaports, ensuring seamless logistics for global trade, a release from the Ministry of Textiles said.

The park is equipped with state-of-the-art infrastructure, including an extensive internal road network, dedicated power substation and assured water supply. It also emphasises sustainable development through a common effluent treatment plant with zero liquid discharge technology.

The Ministry of Textiles approved the establishment of seven PM MITRA parks in the states of Telangana, Tamil Nadu, Karnataka, Maharashtra, Uttar Pradesh, Gujarat and Madhya Pradesh in March 2023.

Industries being set up in the park will not only have access to world class infrastructure facilities for the textile sector, but will also receive competitive incentive support (CIS) under the PM MITRA scheme.

Manufacturing units become eligible for incentive support for which total fund of ₹300 crore for each park, thereby making these parks more attractive to investors.

Units in the PM MITRA parks are also eligible for benefits in convergence with other government schemes.

Fibre2Fashion News Desk (DS)