In many churches, often strapped for cash, the switch to a heat pump may be borne from necessity. Staff at St. Peter Mancroft Church in Norwich, which already had solar panels, opted to make the jump to a heat pump system when one of their old gas boilers failed.

“The church decided this was a good time to try and commit to it,” says Nicholas Jackson, from architectural design firm Nicholas Vanburgh Ltd. Jackson is also a fabric officer for the church. Last year, two table-like, upward-facing air source heat pumps were installed in a small yard next to the 15th-century building. These connect to an Edwardian cast iron radiator system, and the heat pumps are currently running at a COP of 4.

The church also opted for a battery storage system. Jackson says he’s still unsure of exactly how the heat pumps will cope during a really cold spell—one gas boiler remains as a backup.

“We were very blessed to be one of the early adopters on some of this stuff,” says Reverend Edward Carter, the vicar. He adds that within the church is an “Earth Chapel,” intended to focus Christian minds on the importance of the environment. “We’re trying to say something to the City of Norwich here, and maybe to the wider world,” says Carter.

Churches are far from the only community-centric buildings in the UK currently reengineering how they do things. Village halls, covered markets, and public transport hubs are also, in some cases, putting in solar panels, LED lighting, and electric-powered heating systems.

For certain believers, though, the spiritual component of decarbonization is key. There’s something deeper at work here, and perhaps enthusiasm like this could accelerate society’s broader transition towards cleaner technologies. Knott’s opinion is that Christians should be motivated, by scripture itself, to look after the planet.

“We’re not jumping on the bandwagon,” he says. “This has been a message for 2,000 years.”

Robots aren’t always the most delicate of machines when handling fragile objects. They don’t have the lightness of touch of humans. But that could be about to change thanks to a new development in smart materials.

Researchers have developed a method for weaving flexible fibers that can be controlled by magnetic fields. Not only can this be used for robot hands to pick up objects like soft fruits, potato chips and worms, but it can also be used in a range of other applications. These include gloves that provide a realistic touch in virtual reality and breathable fabrics.

Creating a new smart fiber

In a paper published in the journal Nature, researchers detail how they created their smart textile, which can bend, stiffen or change its surface texture on demand. First, the team mixed tiny, soft magnetic particles (carbonyl iron) into extremely thin, flexible fibers of a polymer, LDPE (low-density polyethylene).

To overcome the challenge of making a fiber that is both thin and packed with magnetic materials, the researchers used a process called melt spinning. This high-speed technique allowed them to create fibers just 57 micrometers in diameter.

The next stage involved twisting seven of the fibers together into a helical yarn. The importance of this shape is that it can respond to a magnetic field from any direction. This is what truly sets it apart from other smart materials.

Instead of being limited to simple “on/off” reactions (like heating or stiffening when a voltage is applied), which is called scalar control, the helical shape provides the material with directional control. That means it can respond to the strength and direction of the magnetic field, which allows more sophisticated movements.

“Our work provides insights into stimuli-responsive fibrous materials, elevating them from scalar to sophisticated vector control, heralding an era of smart textile innovation,” wrote the researchers in their paper.

Real-world applications

The team created two types of fabrics from the yarn. A woven textile that is best for bending and stretching, and a cut-pile fabric that looks and feels like a soft brush. From the woven textile, they made a kind of fabric patch that automatically opens and closes tiny ventilation slits in response to a magnetic field cycling on and off. This could be used to manage sweat and heat instantly.

With the cut-pile fabric, they built a soft robotic gripper. Because the thousands of magnetic fibers can individually stiffen and mold around objects, the gripper enables robots to safely and gently pick up delicate objects.

Additionally, the researchers made a virtual reality haptic glove. When you grab a virtual object, a remote magnetic field stiffens the fibers or presses them against your skin to simulate real-world tactile sensations.

Next up for the team is to improve the materials for commercial use, ensuring they are durable and safe for comfortable, everyday clothing.

© 2025 Science X Network

By turning wastewater sludge into biocoal and green hydrogen, EU researchers are helping reduce the steel industry’s environmental impact.

What comes out of our wastewater treatment plants may not be very appealing, but the real problem is what is left behind after water treatment. Wastewater plants produce a liquid sludge that is usually dried and then burned or dumped. This is costly, polluting, and has long been considered wasteful.

A group of researchers see it differently. This sludge, they argue, could become an unlikely ally in the fight against climate change—a feedstock for producing the hydrogen and carbon needed to make greener steel.

“This sludge has value, it is not just waste,” said David Chiaramonti, professor of energy systems, energy economics and bioeconomy at the Polytechnic University of Turin in Italy. “With it we can create things like carbon and hydrogen.”

Towards green steel

Chiaramonti is leading an EU research initiative called H2STEEL that brings together academics and steel industry experts from France, Italy, the Netherlands, Spain and the UK. Their goal is to design a process to extract the useful materials from wastewater sludge so that they can be reused and help reduce the steel industry’s emissions.

Steel production is essential for everything from airplanes and cars to buildings and wind turbines. It is also a major driver of climate change.

According to a 2023 report by the International Energy Agency, the steel sector alone accounts for 8% of global CO₂ emissions. By comparison, the aviation industry emits about 2.5% of global CO₂ emissions.

Cutting these emissions is particularly difficult. Steelmaking is complex and typically requires carbon-rich ingredients, which inevitably release greenhouse gases. That makes it one of the hardest industries to decarbonize—and one of the most expensive to transform.

Traditional steel production methods face increasing carbon pricing pressures across Europe under the EU’s Emissions Trading System. According to market forecasts, carbon prices could reach €120–150 per metric ton of CO₂ by 2030, potentially adding significant costs per ton of steel produced.

For a global steel market worth more than €2.5 trillion annually, finding affordable low-carbon alternatives is urgent.

Hot sludge

This is where H2STEEL comes in. “It’s a good example of the circular economy,” said Chiaramonti. “We take a little-used resource, wastewater sludge, and make it useful again.”

The process works in two main steps. First, sludge is heated without oxygen to create biocoal, in a process called “carbonization.” Then methane from biogas plants is processed using this biocoal as a catalyst to produce hydrogen.

During this process, the biocoal becomes even richer in carbon, making it valuable for steelmaking. Another by-product, phosphorus, is separated for use in fertilizers.

Both outputs—hydrogen and carbon-rich biocoal—could help make steel cleaner. Traditional steelmaking burns coal with iron ore, releasing CO₂. With H2STEEL’s approach, hydrogen can replace some of that coal. Meanwhile, the biocoal substitutes regular coal, turning waste into a useful industrial input.

The team is now building a 4-meter-tall processing machine in Turin to demonstrate the technology. “We break the biomethane into carbon and hydrogen by using the carbonized sludge at 900°C,” explained Chiaramonti. “That’s how we turn it into biocoal and circular hydrogen.”

Carbon and hydrogen

Official results are not available yet for the project, which will finish in March 2026, but the potential is significant.

Decarbonizing steel is attracting intense research efforts, from electrical furnaces to hydrogen-based processes. H2STEEL’s sludge-based approach could slot into this wider transformation.

“This technology is very flexible,” said Jan Wiencke, team leader for sustainable carbon at steelmaker ArcelorMittal’s research center in Maizières, northern France.

Headquartered in Luxembourg, ArcelorMittal is the second-largest steel producer in the world.

The company is also a partner in the H2STEEL project and hopes to be able to use the technology being developed at their steel plants.

“Whether we use a hydrogen furnace or an electrical one, we will still need ingredients like carbon and hydrogen in our processes,” said Wiencke.

“With this technology we can already reduce emissions now, and it will continue to be useful in the future.”

Other partners include Leiden University in the Netherlands and Imperial College London.

Next steps

One of H2STEEL’s biggest advantages is speed. If trials succeed, the technology could be rolled out within a few years—unusually fast in an industry where infrastructure changes often take decades.

Still, challenges remain. “We need to secure the sludge, transform it, and deliver it to the steel plants,” said Chiaramonti. Setting up supply chains and minimizing costs will be crucial.

ArcelorMittal, which aims to be carbon neutral by 2050, is watching closely. “This is a great technology for the steel industry, but it must prove itself economically,” said Wiencke.

A patent is already pending, and the partners are eager to see results from the demonstrator. “What we’re doing looks very promising,” said Chiaramonti. “Now it’s a question of taking the last steps.”

If successful, H2STEEL could deliver more than a technical breakthrough. By turning waste into valuable raw materials, it embodies the principles of the circular economy, helping Europe stay competitive while moving closer to its net-zero goals.